vai alla versione Italiana
Home page
Slatted Tender
Rib tender
Blufton JET Tender
Patented
Polyurethane collars
HI - FENDER

DOUBLE FABRIC WITH EXTRA-STRONG POLYURETHANE COATED

Six layer to obtain the maximum resistance
External layer made in polyurethene Elastar TPU® by CHIORINO®
Extra resistant to abrasion
Easy to clean




Inflation-deflation and safety valve. Exclusive heavy stainless-steel double mooring point.


Can be supplied in any size with or without the logo or the name of your yacht. Special versions are available for dock wall use.
 Standard dimension
ARTICLE
DIAMETER
 LENGHT DIAMETER LENGHT
Code cm. cm. Inches Inches
HF 35100.... 35 100 14 40
HF 35200.... 35 200 14 80
HF 35300.... 35 300 14 120
HF 43100.... 43 100 17 40
HF 43150.... 43 150 17 60
HF 43200.... 43 200 17 80
HF 43300.... 43 300 17 120
HF 55150.... 55 150 22 60
HF 55200.... 55 200 22 80
HF 55300.... 55 300 22 120
HF 90150.... 90 150 36 60
HF 90250.... 90 250 36 100
HF 90300.... 90 300 36 120

 IMPORTANT: ADD TO THE CODE THE COLOUR'S CODE, EXAMPLE: HF35100 BLYE
HI-FENDER Accessories

Standard equipement: foot pump
Optional: electric pump 12 v - electric pump 220 v

Download Hi-Fender depliant

Download Hi-Fender depliant

PLYURETHANE COLLARS
RAW-MATERIALS - Polyurethane and pvc
SINER”g” has already established an enviable reputation for the supply of collars and tenders in PVC.
Now, that same expertise is extended to products fabricated in POLYURETHANE coated material named Elastar TPU®.
This development is made possible thanks to advances in manufacture and material technology resulting from close collaboration with a world-leader in polyurethane coated textiles. (Chiorino SpA)

Visit site
Clicca per ingrandire Clicca per ingrandire
Clicca per ingrandire   Clicca per ingrandire
Polyurethane is a remarkable material, exceptionally resistant to abrasion, cut and puncture. It does not contain oils or plasticizers and is very elastic. It is non-allergenic and durability is inherent. All seams are thermally fused together for the ultimate in reliability. Polyurethane collars can easily be repaired using the same adhesive that is used to repair PVC collars or rubber collars.

WE CAN SUPPLY COLLARS UP TO 12 METRES IN LENGTH


Materials resistance diagram
The diagrams represent the average values tested in laboratory on materials suitable for the manufacture of inflatables, are refered only to the external coating.
A) Resistance to puncture
B) Resistance to abrasion C) Resistance to ageing



SINER"g" Srl - Cap. Soc. Euro 73.000,00 int. Vers.- R.E.A. n.170950 Reg. Impr. RA - Cod.Fisc.- P.IVA 02094580392
via dei Fabbri, 6 - 48011 Alfonsine (RA) - Tel. e Fax +39 0544 84078 - email: info@aermarine.com